Audison Prima APK 165

£199.99

APK 165

Two way system features AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.
To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.

Description

Slim fit 2-Way component upgrade speaker system
This superb component pair has been designed for direct replacement of OEM speakers. The shallow basket and fast connectors keep install time down to a minimum while the woofer’s triple wave surround helps with linearity under maximum excursion conditions. The tweeter features an acoustic lens designed to overcome the problems associated with attenuation at certain frequencies by OEM grills.

AP 1 tweeter with 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.2 AP

tweeter with acoustic lens designed to compensate for and fine tune the in-car frequency response anomalies in the 10kHz – 13kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.

APCX TW very compact tweeter passive crossover optimised for OEM Integration featuring an attenuation switch (0 dB, +2dB) to tune the in-car response according to different installation conditions.

Passive crossovers are supplied with “OEM Integration compliant”fast-on connectors. The ends, different in each of the two poles, eliminate any possible connection errors and speed up the required installation time.

AP 6.5 woofer with 32 mm pure copper voice coil, for high power handling and outstanding low frequency control.

AP 6.5 woofer with water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel R&D Scan Vibrometer.

AP 6.5 woofer with reduced mounting depth, providing ease of installation in OEM placements.

AP 6.5 woofer with TPU (Thermoplastic Polyurethane) surround, featuring the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.

AP 6.5 woofer with compact basket, protected by abrasion-resistant and scratch-proof coating, the motor affixed with damping epoxy adhesive.

AP 6.5 woofer with high current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature resistant plastic cover, protecting it against accidental short circuits.

Developed with the KLIPPEL suite.

* Grille included

Technical Data

 

Comp 2 way System
Size 165 mm (6.5″) Woofer
26 mm (1″) Tweeter
46,5 x 37,5 x 20,1 mm (1.83″ x 1.47 x 0.8) Crossover
Power Handling 100 W Continuous Power
300 W Peak Power
Impedance 4 Ω
Frequency Response 60 – 20k Hz
Sensitivity 93,5 dB/Spl
Comp 2 way System
Size 165 mm (6.5″) Woofer
26 mm (1″) Tweeter
46,5 x 37,5 x 20,1 mm (1.83″ x 1.47 x 0.8) Crossover
Power Handling 100 W Continuous Power
300 W Peak Power
Impedance 4 Ω
Frequency Response 60 – 20k Hz
Sensitivity 93,5 dB/Spl