Audison Prima APBX 8 DS

£279.99

Need removable, low, strong bass in a small space? This 8″ sub in its smart, compact enclosure could be just what you are after. Featuring adjustable, anti-slip velcro covered feet, this compact bass enclosure at just 8.5 Litres features the APS 8 D dual coil 8″ subwoofer offering long excursion for a subwoofer in this class and therefore able to produce lots of bass when matched with a Prima amplifier.

Description

APBX 8 DS

The APBX 8 DS loaded enclosure provides the highest performance/ size ratio. For this purpose an 8.5 lt. sealed enclosure with a 4+4 Ω dual voice-coil configuration was adopted to exploit the full power of an AP5.9 bit (paralleling voice coils for a 2-ohm load) or with two pairs of AP8.9 bit bridged channels (one bridged pair of channels to each voice coil). The speaker’s high excursion capability allows the use of the proprietary BASS BOOST of AP bit amplifiers to make use of all the available power for rich and dynamic bass.

Technical Data
Comp SEALED SUB BOX
Size 200 mm (8”)
Power Handling 250 W Continuous Power
500 W Peak Power
Impedance 4 Ω + 4 Ω
Sub box size mm (in.) 377 (14.84) x 334 (13.15)x 109 (4.29)
Magnet High density flux ferrite
Cone Cotton-Fibre pressed paper
Weight of one component kg (lb) 6,22 (13.71)

 

  • Ultra-low profile (5.16 in. / 131 mm) box with sealed design perfectly tuned to fully exploit the APS 8 D driver.
  • 2S² (2 Sides/2 Sounds) design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing install to obtain more punch and definition.
  • Leveling feet with velcro inserts included for a secure grip with the carpet while maintaining easy removal.
  • SSP (Sub Smart Plug) features both traditional push contacts and a Plug-&-Play terminal block to easily configure the impedance as requiredand provides a quick release.
  • Rounded corners allow easy positioning in the trunk and act as reinforcement to reduce enclosure resonance.
  • Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (9 mm, one-way).
  • Massive driver motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
  • Water-repellent pressed paper 8 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
  • Specifically developed to be combined with either AP1 D mono or AP4.9 bit/AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.
  • Sturdy metal grid included for a total protection of the subwoofer driver.